Green Eggs with Bag
Green Eggs Staight View
Green Eggs
Rocket Recovery
Green Eggs Payloader Flying Model Rocket - Holds an Egg
Green Eggs Payloader Flying Model Rocket Parts Picture

Green Eggs™

SKU: 007301
MSRP/MAP: $23.99
$23.99
Intermediate

Designed for Estes C11 and D engines, this rocket model can safely carry a regular-sized raw egg as its payload. With its clear payload section, you can even fit two eggs with a D12-3 engine! The Green Eggs rocket's swept fins not only add stability during flight but also allow the Green Eggs rocket to stand by itself.

Additionally, the balsa fins are thick enough to enhance alignment and provide exceptional strength, making it suitable even for mounting through a wall. With a main body tube and clear payload section of the same diameter, the Green Eggs rocket is easy to set up with a standard launch lug without the need for awkward stand-offs. Overall, the Green Eggs lofting rocket provides a safe and fun way for your students to conduct experiments with their "eggstronauts" without spending too much time on building.

Overview

Green Eggs lofting rocket designed for Estes C11 and D engines. However, carrying a regular size raw egg as a payload comes very close to exceeding the max lift capability of most C6 engines used in other egg loft kits. Therefore, we recommend Estes C11 engines instead. They will provide a safe and stable flight, along with a recovery suited for small-sized flying fields.

Green Eggs lofting rocket's clear payload is big enough to carry TWO eggs (with a D12-3 engine)! Swept fins allow the egg lofting rocket to stand by itself.

The main body tube and clear payload section are both the same diameter so that you can glue a standard launch lug into place without the need for an awkward stand-off.Green Eggs Balsa fins are thick enough to enhance alignment and provide exceptional strength, even when Green Eggs are mounted through a wall.

All these lofting rocket features add up to less time building and, therefore, more fun time for your students to perform experiments with their “eggstronauts”.

Estes Green Eggs Model Rocket

What You Need to Fly

Estes Porta-Pad II Launch Pad and Electron Beam Launch Controller, 3/16 inch "Maxi" Launch Rod. Estes model rocket engines, starters and recovery wadding.
Four 1.5V high quality AA alkaline batteries (sold separately)

Technical Specifications

  • Recommended Engines

w/ egg : C11-3, D12-3
w/out egg : C11-5, D12-5
  • Launch System

Porta-Pad II
  • Projected Max Altitude

w/ egg : 825 ft. (251 m)
w/out egg :1050 ft. (320 m)
  • Recovery System

18 in. (45.7 cm) Parachute
  • Length

23.6 in. (59.9 cm)
  • Diameter

1.8 in. (46 mm)
  • Weight

3.5 oz. (99.2 g)
  • Fin Material

Laser Cut Balsa Wood
Green Eggs Model Rocket Kit Parts

Needed to Build (sold separately)

Scissors, pencil, ruler, fine sandpaper, carpenter's glue, sanding block, hobby knife, masking tape, clear tape, primer (white), paint (green, white) and clear coat (optional).
This product recommended for children ages 10+ with adult supervision for those under 12, and rocketeers of all ages.

Customer Reviews

Based on 7 reviews
86%
(6)
0%
(0)
0%
(0)
14%
(1)
0%
(0)
W
Will Pilkington (Butler, AL)
Way too complicated

This rocket could be made a lot simpler to put together by making alot of the parts out of plastic or metal. Way more
complicated than what it should be.

J
J.A. (Anchorage, AK)
Loads of fun

A fantastic rocket that we launched twice on a sunny Father's Day. The kid's loved lunching both a toy chicken and an egg simultaneously. Everyone was smiles. I'm looking forward to launching an accelerometer or something "scientific" in the payload module.

r
ron jon bonson
veryyyyyy happppppypypypypyy with tha rockettt go very big hi yes

veryyyyyy happppppypypypypyy with tha rockettt
go very big hi yes